You are here:Home > Products > IT SOLUTIONS > Interfaces & Gateways > NMEA Gateways
NMEA Gateways, NMEA2000-to-NMEA0183 and NMEA0183-to-NMEA200 convertors (RS232/RS422/RS485).
Sort By:
Page of 1
NGW-1-ISO NMEA 2000 Gateway NGW-1-USB NMEA 2000 Gateway NGT-1-USB NMEA 2000 PC Gateway
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
USB version.
Interface to NMEA 2000 with a fully functional bi-directional firewall gateway ...
The Actisense™ NMEA 2000 to PC Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
NGT-1-ISO NMEA 2000 PC Gateway USG-1-422 USB to NMEA 0183 Gateway NGW-1-STNG NMEA 2000 to 0183 Gateway
Interface to NMEA 2000 with a fully functional bi-directional firewall gateway ...
The Actisense™ NMEA 2000 to PC Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
Connect your data network to your PC USB port with full electrical isolation...
The Actisense™ USG-1 interface is an easy, safe and low-cost method of connecting a marine NMEA 0183 system to a USB equipped PC. Whilst protecting the most vital and expensive devices in the NMEA 0183 system, it also creates a virtual serial port that allows connection to an NMEA 0183 (RS422) marine bus link.
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Raymarine SeaTalk NG version.
EMU-1 NMEA2000 Engine Monitoring Unit DIN-KIT-1 DIN Rail Mounting Kit NGW-1-ISO-AIS NMEA 2000 to 0183 Gateway
The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor one or two engines on a vessel. DIN Rail Mounting Kit for EMU-1 and NBF-3. Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Pre-configured with AIS conversions.
DIN-KIT-2 DIN Rail Mounting Kit A2K-4WT NMEA 2000 Connector Micro 4-way T piece A2K-SBN 4-WAY SMALL BOAT NETWORK
DIN Rail Mounting Kit for USG-2. A2K-4WT NMEA 2000 Connector Micro 4-way T piece. Quick and easy to install as a single T-piece, uses less space than two individual T-pieces and costs less than three. The A2K-SBN 4-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for four devices with internal terminators and power feed.
A2K-RSK-1 NMEA 2000 Reduced Starter Kit USG-2 USB to NMEA 0183 Gateway
The A2K-RSK RIB STARTER KIT is an ideal solution for RIB users that wish to install an NMEA 2000 network. The USG-2 USB to NMEA 0183 Gateway converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.