You are here:Home > Products > IT SOLUTIONS > Interfaces & Gateways > NMEA Interfaces
NMEA Auto-switches, Buffers, Multiplexers and Depth-Sounder Modules.
Sort By:
Page of 1
NDC-4 NMEA Multiplexer NDC-4 NMEA Multiplexer NDC-4-ASW NMEA Autoswitch
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
Multiplex or Autoswitch up to 4 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 USB version.
Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Autoswitch allows connection of up to five NMEA (National Marine Electronics Association) inputs, and autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as Autoswitch.
NDC-4-AIS NMEA Multiplexer NDC-4-AIS-USB NMEA Multiplexer NBF-3-BAS NMEA Buffer
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer, with USB cable.
The Actisense NBF-3 NMEA Buffer isolates and buffers NMEA 0183 data, with the power to drive multiple devices.

The NBF-3 can distribute up to six identical, amplified streams of data from one source. The NMEA signals are buffered to ensure that each Listener receives the data at the required voltage levels, providing consistent data quality.
QNB-1 Quick Network Block DST-2-150 Depth Sounder Module/Interface DST-2-200 Depth Sounder Module/Interface
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
DST-2-170 Depth Sounder Module/Interface QNB-1-PMW Quick Network Block A2K-MPT-1 NMEA2000 Power Tap
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
The Actisense A2K-MPT-1 NMEA2000 Micro Power Tap comes with micro male and female connectors, 3m UL certified cable and left and right power feed pairs.
PRO-BUF-1-BAS-R Professional NMEA 0183 Buffer PRO-BUF-1-BAS-S Professional NMEA 0183 Buffer PRO-MUX-1-BAS-R Professional NMEA 0183 Multiplexer
Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage. Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage. A robust and highly flexible professional NMEA 0183 Multiplexer that cures many inter-connectivity headaches! Eight NMEA 0183 inputs can be routed to any of six NMEA 0183 outputs, providing a highly customisable network. A bi-directional serial port and an Ethernet port for simple configuration and diagnostics.