You are here:Home > PRODUCTS > IT SOLUTIONS > NMEA 0183 & NMEA 2000 Networks > NMEA 0183 Accessories
Sort By:
Page of 1
NDC-4-USBKIT USB Cable to convert NDC4 to NDC4USB PC-OPTO-4 NMEA0183 to RS232 Opto-Isolator Cable PC-USB-1 USB to Serial Adapter
NDC-4 USB Cable to convert NDC-4 to NDC-4-USB The Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 Opto-Isolator Serial Adaptor Cable which provides a safe method of connecting an NMEA 0183 system to a laptop PC or any device with a standard RS232 9-pin port. Reverse the current trend and convert one or more USB ports into standard PC RS232 ports ...
USG-1-422 USB to NMEA 0183 Gateway DIN-KIT-1 DIN Rail Mounting Kit DB9-F
Connect your data network to your PC USB port with full electrical isolation...
The Actisense™ USG-1 interface is an easy, safe and low-cost method of connecting a marine NMEA 0183 system to a USB equipped PC. Whilst protecting the most vital and expensive devices in the NMEA 0183 system, it also creates a virtual serial port that allows connection to an NMEA 0183 (RS422) marine bus link.
DIN Rail Mounting Kit for EMU-1 and NBF-3. Cable assembly with 9 Pin, D-type moulded connector (female)
DIN-KIT-2 DIN Rail Mounting Kit USG-2 USB to NMEA 0183 Gateway USBKIT-PRO	USB To Serial Adapter for PRO Products
DIN Rail Mounting Kit for USG-2. The USG-2 USB to NMEA 0183 Gateway converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus. USB KIT USB To Serial Adapter for use with PRO range products
USG-2 USB Cable	Spare shielded cable for USG-2 USBKIT-REG USB To Serial Adapter for NDC-5 RJ45-FFC Waterproof Connector for NDC-5
USG-2 USB Cable Spare shielded cable for connecting USG-2 to PC USBKIT-REG. USB To Serial Adapter for use with NDC-5 RJ45-FFC Waterproof Ethernet Connector for use with NDC-5