|
|
|
|
|
|
|
|
|
|
|
|
|
|
A2K-4WD NMEA 2000 Drop Cable Assembly with Micro 4-way Drop. Quick and easy to install as a single T-piece, uses less space than four individual T-pieces and costs less than three.
|
A2K-4WT NMEA 2000 Connector Micro 4-way T piece. Quick and easy to install as a single T-piece, uses less space than two individual T-pieces and costs less than three.
|
The A2K-KIT-3 Reduced STARTER KIT is an ideal solution for RIB users that wish to install an NMEA 2000 network.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-SBN-1 4-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for four devices with internal terminators and power feed.
|
The A2K-SBN-2 8-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for eight devices with internal terminators and power feed.
|
DIN Rail Mounting Kit for EMU-1 and NBF-3.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIN Rail Mounting Kit for USG-2.
|
The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor one or two engines on a vessel.
|
MKC-105/106A Repeater Convertor Serial to NMEA-Synchro
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NBF-3 NMEA Buffer isolates & buffers NMEA 0183 data, driving multiple devices. Distributes up to 6 identical, amplified data streams from 1 source. Signals are buffered ensuring Listeners receive the right data voltage levels for consistent data quality.
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer, with USB cable.
|
Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Autoswitch allows connection of up to five NMEA (National Marine Electronics Association) inputs, and autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as Autoswitch.
|
Multiplex or Autoswitch up to 4 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 USB version.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Robust & highly flexible NMEA 0183 Multiplexer. Cures inter-connectivity headaches! 5 NMEA 0183 inputs routable to any of 2 NMEA 0183 outputs. Serial & Ethernet ports. Creates highly customizable network. Bi-directional serial port & Ethernet port allow simple configuration & diagnostics with Actisense software.
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Pre-configured with AIS conversions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Raymarine SeaTalk NG version.
|
NGW-1 NMEA 2000 to 0183 Gateway; the easy way to link old and new data networks. Converts NMEA 0183 data into NMEA 2000 data and vice-versa. Advanced configuration software for simple setup which data items to translate between 2 buses. USB version.
|
NMEA to Synchro Convertor Unit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NT990HDI Step/Synchro to NMEA Interface
|
The Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 Opto-Isolator Serial Adaptor Cable which provides a safe method of connecting an NMEA 0183 system to a laptop PC or any device with a standard RS232 9-pin port.
|
Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.
|
PRO-BUF-2 Professional Type Approved Intellligent NMEA0183 Buffer. Two OPTO-isolated inputs and twelve ISO-Drive™isolated outputs.
|
Robust & highly flexible professional NMEA 0183 Multiplexer. Cures many inter-connectivity headaches! 8 NMEA 0183 inputs can be routed to any of 6 NMEA 0183 outputs. Creates a highly customizable network. Bi-directional serial port & Ethernet port for simple configuration & diagnostics. Screw terminals version.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A robust and highly flexible professional NMEA 0183 Multiplexer that cures many inter-connectivity headaches! Eight NMEA 0183 inputs can be routed to any of six NMEA 0183 outputs, providing a highly customisable network. A bi-directional serial port and an Ethernet port for simple configuration and diagnostics. PRO-MUX-1-BAS-S version with screwless terminals.
|
Actisense PRO-MUX-2 Professional Intelligent NMEA0183 Multiplexer. 8 Inputs, 6 Outputs. A robust and highly flexible NMEA 0183 platform that cures many inter-connectivity headaches!
|
Actisense PRO-NBF-1 Type Approved NMEA 0183 Buffer. Safely connect one Talker to six Listeners with full isolation
|
|
|
