|
|
|
|
AIS WATCHMATE 850 TRANSPONDER Class-B includes a built-in AIS Transponder with two channel parallel receiver and transmitter. This high performance transponder means greater range and increased safety. It also makes installation easier. No external "black boxes" to mount, power and wire. Just plug in a VHF antenna and connect the AISWatchMate 850 Transponder to your 12 or 24 volt power supply. Receives Class A, Class B and AIS SART & MOB. The system has ultra-low power consumption and is fully waterproof including its USB Connection. The WatchMate has an Anchor Watch feature and a DSC function to allow you to initiate an "individual station call" from your WatchMate to vessels that are displayed on your WatchMate screen. Target Plot provides a radar-like display of all vessels within the selected range. Graphical Plot Shows Target Crossing Situations, CPA, TCPA, bearing & range, vessels and alarms are presented in priority order. Intelligent Filtering In crowded operating areas eliminates clutter and false alarms with sophisticated filtering options. Guard alarm Sounds an alarm if any vessel comes within the specified range. Concise and easy to read display with uncluttered AIS data. Displays safety messages and Aids to navigation (AtoN). "Identify your fleet" functionality to display targets marked as members of your fleet with a special icon. Meteorological and hydrographic display provides real-time wind, current, tidal and much more in areas where this information is broadcast. Large backlit LCD display, built-in GPS receiver. Easy to use, four buttons control all features. Each button is clearly labeled on-screen. External interface, complete AIS and GPS outputs and is easily interfaced to chart plotters, radars or computers. Silent Mode functionality for AIS reception only. Includes:
- WXM850 WatchMate 850 AIS Class-B transponder with built-in GPS antenna
- Protective cover
- Quick start guide
- Mounting bracket with thumbscrews
- Flush mounting template
- 2m Power/data cable
- 1m USB cable
- Flush mounting seal and screws
- CD with all documentation including user guide
- Environmental Watertight (USCG CFR- 46, IPx7)
- Number of receivers 2 AIS, 1 DSC (timeshared)
- Receive Sensitivity -113dBm
- Number of transmitters 1 AIS
- Size 208mm wide x 135mm high x 76mm depth
- LCD panel 125mm (5”) FSTN 320x240 backlit
- Operating temperature -25°C to +55°C (-13°F to 131°F)
- Power supply 12-24 VDC 3 watts nominal
- TX Power output 33 dBm (2W)
- External alarm Maximum 150 mA
- Serial data 1 USB port (mini), 1 NM EA input
- (RS422), 1 NMEA output (RS422)
- GPS 50 channel, TNC for optional antenna
- VHF antenna required PL-259 connector. 50 ohm, max 2:1 VSWR
WatchMate has been designed to simplify the display of other ships AIS location and course information. WatchMate filters out non-priority targets and only displays the vessels that may be on a collision course, removing the uncertainty and stress related to navigating in highly congested and isolated waterways. The WatchMate installation is designed to be easy, with its built in GPS antenna, IP67 rated water proofing and multiple mounting options.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features & Benefits
- Unique Vesper Marine filtering eliminates the clutter of vessels shown by other AIS displays
- Sophisticated alarm management eliminates false alarms
- Full receive and transmission of all AIS data
- Built in GPS with GPS patch antenna
- Ability to connect to computers via waterproof USB
- Allows transponder to be put in Silent Mode
- Unique low power anchor watch
- VHF “in use” indicator (when used with VesperMarine’s VHF splitter)
- Place DSC calls automatically on-screen (when connected to a VHF)
- Simple installation, fully self contained, no need to wire an external GPS antenna in many cases
- The lowest power consumption stand-alone transponder on the market
- Listing of vessels by target priority
- Multiple profiles based on location
- Plots future crossing positions
- Anchor Watch to monitor anchor drag
- Displays GPS status, position, course and speed
|
|
|
|
|
|
Accessories for this product... |
|
|
|