You are here:Home > Products > NAVIGATION SOLUTIONS > Interfaces - PC/NMEA
Various NMEA Interfaces, NMEA0183 and NMEA200, to interconnect navigation and communication systems and PCs.
Sort By:
Page of 1
NDC-4 NMEA Multiplexer NDC-4 NMEA Multiplexer NDC-4-ASW NMEA Autoswitch
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
Multiplex or Autoswitch up to 4 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 USB version.
Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Autoswitch allows connection of up to five NMEA (National Marine Electronics Association) inputs, and autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as Autoswitch.
NDC-4-AIS NMEA Multiplexer NDC-4-AIS-USB NMEA Multiplexer NBF-2 NMEA Buffer
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer, with USB cable.
World first: The power to drive up to six NMEA devices, with the safety of total input and output isolation, for total peace of mind ...
The Actisense™ NMEA Buffer module is the best solution for buffering weak NMEA sources, allowing NMEA devices to be driven, such as chart plotters, radars, and/or an on-board PC / Laptop.
NBF-3-BAS NMEA Buffer QNB-1 Quick Network Block NGW-1-ISO NMEA 2000 Gateway
The Actisense NBF-3 NMEA Buffer isolates and buffers NMEA 0183 data, with the power to drive multiple devices.

The NBF-3 can distribute up to six identical, amplified streams of data from one source. The NMEA signals are buffered to ensure that each Listener receives the data at the required voltage levels, providing consistent data quality.
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
NGW-1-USB NMEA 2000 Gateway NGT-1-USB NMEA 2000 PC Gateway NGT-1-ISO NMEA 2000 PC Gateway
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
USB version.
Interface to NMEA 2000 with a fully functional bi-directional firewall gateway ...
The Actisense™ NMEA 2000 to PC Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
Interface to NMEA 2000 with a fully functional bi-directional firewall gateway ...
The Actisense™ NMEA 2000 to PC Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
DST-2-150 Depth Sounder Module/Interface DST-2-200 Depth Sounder Module/Interface USG-1-422 USB to NMEA 0183 Gateway
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
Connect your data network to your PC USB port with full electrical isolation...
The Actisense™ USG-1 interface is an easy, safe and low-cost method of connecting a marine NMEA 0183 system to a USB equipped PC. Whilst protecting the most vital and expensive devices in the NMEA 0183 system, it also creates a virtual serial port that allows connection to an NMEA 0183 (RS422) marine bus link.
DST-2-170 Depth Sounder Module/Interface NGW-1-STNG NMEA 2000 to 0183 Gateway EMU-1 NMEA2000 Engine Monitoring Unit
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Raymarine SeaTalk NG version.
The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor one or two engines on a vessel.
DIN-KIT-1 DIN Rail Mounting Kit NGW-1-ISO-AIS NMEA 2000 to 0183 Gateway QNB-1-PMW Quick Network Block
DIN Rail Mounting Kit for EMU-1 and NBF-3. Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Pre-configured with AIS conversions.
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
A2K-MPT-1 NMEA2000 Power Tap PRO-BUF-1-BAS-R Professional NMEA 0183 Buffer PRO-BUF-1-BAS-S Professional NMEA 0183 Buffer
The Actisense A2K-MPT-1 NMEA2000 Micro Power Tap comes with micro male and female connectors, 3m UL certified cable and left and right power feed pairs. Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage. Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.
DIN-KIT-2 DIN Rail Mounting Kit
DIN Rail Mounting Kit for EMU-1 and NBF-3.